How to make and use beeswax furniture polish on wood?

0
171
How to make and use beeswax furniture polish on wood

How to make and use beeswax furniture polish on wood?

When applied to a wooden surface, the beeswax varnish gives the wooden surface a warm glow. It does not change the appearance of wood but is also a safe and convenient way to polish your wooden furniture. Moreover, it is safe to use on most wood surfaces, even cutting boards. Well, it is an excellent product for polishing in most cases. Of course, you should try a small test area first.

Key ingredients to make Beeswax

The beeswax furniture polish recipe uses only two ingredients: Beeswax and conditioning oil.

  • Beeswax 

Beeswax is used in many household products because it provides a protective layer to wood without deposits or unpleasant chemicals. We also make leather conditioners from Beeswax. For example, you can use any Beeswax for this recipe. Still, I like to use yellow Beeswax from a reputable seller or my honeycomb. It lets you know that the wax has not been treated with chemicals (which can remain on the wax over time). I also like the yellow wax to add color to the final product.

  • Conditioner Oil 

It hydrates old wood and gives it a little shine. There are two options for the oil in this recipe. Either you can use conventional mineral oil or fractionated coconut oil. Mineral oil has long been the top choice for conditioning wood and works very well. However, mineral oil is a petroleum-based product, and some people do not like to use it. If you are looking for an all-natural alternative to mineral oil, fractionated coconut oil is a great choice. Fractionated coconut oil has been processed to retain its liquid form. It has been proven safe for the skin, too (in fact, it is used in many cosmetic recipes).

Moreover, it is also food safe and will not go rancid over time like some vegetable oils. Furthermore, it makes an excellent choice for chopping boards. It’s more expensive, but if you make small batches, you might end up with a smaller bottle.

How to make a natural beeswax furniture polish? 

  1. 1. Put Beeswax and olive oil in a steamer, as shown in the picture below. You can make a steamer by placing the pot in another pot filled with hot water. You want the oil to be heated indirectly and uniformly because it is safer for you and helps not damage the ingredients.
  2. Heat the steamer/pan over medium heat until the Beeswax melts. Stirring will speed up the process but help resist overheating temptation. Boiling water may come into contact with the oil.
  3. Add more antioxidants and essential oils and mix well. Pour the hot mixture into a clean, dry, wide-mouth container. Allow cooling for at least 2 hours until it has a semi-solid consistency.
  4. You can use the polish right away, and it will do a fantastic job of giving a new life to your furniture.

Scoop it with your finger or cloth and apply the polish to the wood surface to use the polish. Excess varnish can be wiped off immediately or left for several hours. It gives the oil more time to penetrate the wood. Then polish it to a glossy finish, and you will be delighted with how nice your wood looks.

How to apply Beeswax to wood? 

Here’s a quick guide to waxing wood furniture and other surfaces in general. You can’t go wrong following these steps, but gather the tools and materials you need first. 

Step 1: Thoroughly clean the wood surface  

If the surface is relatively clean and foreign matter is a concern, clean it with warm, soapy water and rub gently. Rinse the wood surface thoroughly, then air dry it. However, working on an entirely new surface requires removing all old paint, wax, varnish, or other finishes. 

In this case, using a hairdryer and paint scraper or paint thinner may not be sufficient. Scrape off any loose coating and repeat if necessary. Finally, thoroughly rinse the surface with a strong wood cleaner along with plenty of water. Wipe off excess water and allow the surface to dry completely. Depending on the weather in your area, this may take 2-3 hours or more if necessary.

Step 2: Sand the cleaned wood surface 

Grinding is another crucial step in this process. It helps to smooth the surface, which aids in absorbing the abrasive wax. Start sanding with 100 grit sandpaper and work in the direction of the wood grain. Depending on the size of the wood surface, you can use a sander or sanding block. Go over the last round of sanding utilizing 180-coarseness sandpaper. It will give you a smooth and surprising surface that will pop under the wax. You need to scrape sand if you intend to apply wax over a completed surface. Hence, the polish applies well without running off.

Step 3: Apply the first wood varnish with Beeswax 

Once the surface is clean, apply using a clean, lint-free cloth. The trick is to use a minimal amount, neither too little nor too much wax. Scoop the wax out of the jar with a cloth and apply the wax to the furniture in long, broad strokes along the wood grain. Repeat the same process for the entire surface of the wooden furniture. Make sure the wax layer is light and even.

Step 4: Wait for the primary layer of beeswax polish to dry

Allow the primary layer of beeswax furnishings polish to dry for 15 to twenty minutes. Note that this time allowance can range depending on the temperature and humidity for your place and the porosity of the wooden.

It allows the wooden surface to provide sufficient time to absorb the wax. This time interval provides a good surface for the next layer to adhere to without smearing. Make sure the wax is sufficiently dry by pressing on an inconspicuous area with your fingertips. If it is sticky or has fingerprints on it, wait a little longer. When it’s hard enough to the touch, you’re ready to wax again.

Step 5: Re-apply 4 to 5 coats to gain final results

Re-apply some other layer of the beeswax polish in the identical style as the first coat—mild quantities with gentle, lengthy strokes. Again, use a soft spot at the lint-loose fabric you’re using. Get a smooth rag or cloth and rub it on the waxed floor in a round motion. Buffing gets rid of extra polish and smooths out any build-up wax in corners. Through this process, the completed product develops a shine.

Hope this article will be helpful for you, kindly share the feedback in the comment section.